Once you sign in you will be able to subscribe for any updates here

Phoenix VE 12/1200 Remote not working

I have just installed a victron VE 12/1200 inverter and the remote connection doesn't appear to be working.

For example. If the inverter is On or ECO, the inverter remains on regardless of the remote switch position.

Even if I remove the green connector, the inverter remains ON.

If I have the main switch in the OFF position the inverter remains off regardless of the remote switch position.

Can you advise the correct switch position and how the remote wire should work?

Can't really see here as flash from phone make it seem like green LED is off, but it is on and both configurations still provide power to the microwave.



vinnyware asked

0 Answers

Top Contributors - Community Supporters

Alexandra avatar image Alexandra 275 Answers & Comments
netrange avatar image netrange 159 Answers & Comments
Matthias Lange - DE avatar image Matthias Lange - DE 144 Answers & Comments
kevgermany avatar image kevgermany 144 Answers & Comments
ojack avatar image ojack 104 Answers & Comments
matt1309 avatar image matt1309 89 Answers & Comments
JohnC avatar image JohnC 86 Answers & Comments