Multiplus-II
I just installed a multiplus 2 48/5000-70 with a 48v 280ah battery, cerbo gx and smartshunt. Nothing else connected. Via vrm portal the ac-1 out shows a load of 5 watts. Can this be set to 0 or is this noise / emc. Thank you very much for any comments
arjan askedMike Dorsett answered ·
1 Answer
4 Answers
Victron MultiPlus-II 12/3000/120-50 2x120V, GFCI interrupt when switching to mains
jkrellner askedxxn5ac commented ·
3 Answers
Solved: Dual Multiplus-II with non symetric Output and ESS missing Grid-Setpoint
kai-gt askedTom Büschgens commented ·
1 Answer
Multiplus-II / EasySolar-II 48/3000/35-32 MPPT 250/70 GX max output when connected to grid?
surfspan askedtourguide answered ·
3 Answers
Multiplus II not charging in charger mode but will charge batteries in inverter mode. No Leds on in charger mode and not charging with the generator but Leds all good when switched to inverter mode.
ecoworld askedecoworld answered ·
3 Answers
"The primary Case ground connection from ... a Multi or a Quattro, must be connected to the Central Negative Busbar of the DC system. Size of this cable must be identical to connected DC negative" - But how??
eliott askedKevin Windrem answered ·
3 Answers
MP II Current sensor 3.5mm input socket : does it have a contact to sense if the cable is plugged in?
anieuwstadt askedJason - UK answered ·
1 Answer
2 Answers
