virtual switch Image

virtual switch

Feature Request: "Virtual Switch" for Venus OS - solved with Node-red

Hello,


the virtual switch in the MultiPlus is a very useful and powerful tool. I'm wondering if this would also be possible to integrate in VenusOS similar to scheduled charging.


Some independent examples:

- Turn Multi off at 10:00 PM. Turn Multi on at 6:00 AM

- Switch critical loads on for 2h every 48h OR if Battery SOC is >90% AND PV Power is >100W

- Don't turn Multiplus on sundays

- Use Multiplus Charger only between 10:00PM and 06:00AM (probably because Energy is cheaper then)

- Switch Solar Charger off when DC-Loads were <5W for more than 24h (don't know why) and VE.Bus state is off

- Set Absorption-Voltage to 14,2V if Battery-SOC hasn't fallen below 90% for more than 72h

- Set Absorption-Voltage to 14,7V if Battery-SOC has fallen below 60%

- Ignore temperature and turn off compensation if voltage is above/under example-voltage

- Limit Output to 500W as soon as SOC reached <60% and AC-In is connected.

- Stop Discharging if PV-Power is lower than 200W for 1h and SOC has fallen under X%

- DON'T limit charge current if loads are higher than X

- Switch 230V to 220V on overload


and so on ..


regards,


Porcini

porcini asked
spark88 answered ·

4 Answers

Followers

1 Post
33 Users
3 Followers

Topic Experts

There are currently no experts identified for this topic. Can you answer questions in this topic area? Community members who provide answers that are marked as correct earn reputation and may become recognized as topic experts.