question

jayoung avatar image

No Analog inputs shown on cerbo gx.

Originally was showing temperature and tank options in menus. While installing resistive tank sensors the cerbo GX rebooted. now all analog options are blank. The tank over view page shows no tanks connected and no options for temperature sensors available. How can I get those items to show again? It seems like the cerbo GX hardware may have faulted out.

cerbo gxTemperature Sensortank monitortouch gx 50analog
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
svaeolus avatar image
svaeolus answered ·

Sounds similar to my experience:

https://community.victronenergy.com/questions/87083/cerbo-gx-analog-inputs-vanished.html

End result after a lot of back and forth was a warranty replacement

2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.