question

okkildal avatar image
okkildal asked

CCGX Generator start/stopp

Hi

CCGX is not start/stopping generator after FW upgrade, no changes is made in settings. Someone who has same issue ?


FW is now v2.91 , is it a good idea to downgrade to v2.90?


regards

CCGX Color ControlGeneratorRelaygenerator auto startgen start
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Kevin Windrem avatar image
Kevin Windrem answered ·

Working on my test system (a Raspberry PI 4) with v2.91.

Need more details:

What platform: CCGX, Cerbo, Raspberry PI, etc?

Are you by chance running GuiMods or GeneratorConnector?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

okkildal avatar image okkildal commented ·

Platform is CCGX , just using the relay to run generator autonomous.

Manual start from CCGX works fine.

0 Likes 0 ·
Thendo Alton Mbedzi avatar image
Thendo Alton Mbedzi answered ·

@okkildal -Maybe go through everything again -and enable auto start on the gen ATS,

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.