question

Yannick avatar image

Generator start condition logging

I'm using a CCGX to start the generator on serveral conditions, low SOC, high DC current, inverter (pre)overload and AC Load. I want to reduce generator running hours and want to be able to see what condition and with what value triggered the autostart. Is this possible in any way? Either direct in the CCGX or in the VRM portal?

CCGX Color ControlGeneratorautostart
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Yannick avatar image

That's it! Thanks!


Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

EwaldErasmus avatar image

Hi Yannick, yes it is,


in the advanced tab, you can add the generator state widget. It should show you what you want. This is on the VRM portal. It will look like below:


1589405130542.png (14.3 KiB)
Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Yannick avatar image

That's what i'm looking for! But i can't find it on my VRM....

This is what my options look like,


knipsel.png (52.6 KiB)
3 comments Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Yannick avatar image Yannick Daniël Boekel (Victron Energy Staff) ♦♦ ·

Hi @Daniël Boekel (Victron Energy Staff)

I'm running 2.23 on the ccgx

Try to update it to latest version (I think 2.53?), that should fix it.