Victron Dashboard AC in N/A

Question

question

ds1707 asked Mar 28, '22

Victron Dashboard AC in N/A

Hello Community,

I have a fresh installation of Venus OS (2.84) on raspberry and successfully added EM24 via RS485 and solar edge SE15K via Morbus TCP successfully.

Now I just saw, that in my VRM dashboard the AC In is N/A. But power of each phase is displayed. But not the sum.

Did I miss any configuration?

Can anyone help me?

Multiplus 2 is already there and will be installed in the next week's.

Best regards,

Dominik

Venus OS grid em24 dashboard display

screenshot-2022-03-28-08-19-20-871-comandroidchrom.jpg (193.6 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2022-03-28T10:28:06Z

ds1707 answered · Mar 28, 2022 at 10:28 AM

Maybe I need to wait for the Multiplus as stated here?

https://community.victronenergy.com/questions/92988/falsche-einstellung-vom-dashboard.html

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2022-03-28T10:38:28Z

JohnC answered · Mar 28, 2022 at 10:38 AM

Hi @ds1707

Even if you wait for the Multi, there's still a selection to make..

1648463872078.png (50.0 KiB)

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ds1707 commented · Mar 28, 2022 at 10:42 AM

Hello John,

Thanks for your reply. This change gives me a green icon but does not show any values.maybe needs some time.

0 ·

screenshot-2022-03-28-12-40-29-975-comandroidchrom.jpg (213.4 KiB)

JohnC ♦ ds1707 commented · Mar 28, 2022 at 11:30 AM

@ds1707

I actually suggest you call it 'Grid' and not 'Generator', even if you're using a genset. Grid gets treated differently in the VRM summaries and Generator misses out on being included in battery charge figures (which is mainly why a genset is used).

And even if you change as you go along, the data is stored in different registers in VRM, so never balances. Even in a Quattro, which can use both names.

Generator will almost certainly be getting it's data from Multi, so you'll need to wait for that. The installer should set all this up for you.

0 ·

question