question

Shayner avatar image

Gen start / alarm beacon wisdom

Some details on the system

Quattro 15000 with fronius 6k ac coupled on ac 1 out.

Honda eu7000is backup generator.


Color control gx


I would like to have a generator with auto start hooked up and have a strobe beacon which flashes due to alarms. My question is which relay inputs on the gx and quattro would you use? I'm thinking the relay on the gx would be used for the beacon. And a relay used on the quattro for the generator start/stop. Would I lose functionality if the generator was controlled by the quattro instead of the gx?




MultiPlus Quattro Inverter ChargerGeneratorgxgx devicealarm
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image

No you would not loose any functionality the assistants will work fine which ever way you set it up


As you have a GX device. Is it connected to internet and the VRM, you can then set allarms up to emailed you directly, that may be a easyer way to go, thats if you have full time internet that is

Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.