question

chinaka avatar image
chinaka asked

About my victron system using battery protect

Hello I have updated my electrical design for my wiring, I made sure that the current would flow into the BP in and leave from the out. Can you please let me know if this is safe thanks

battery chargingBattery Protectinverter current draw
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·
3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

chinaka avatar image chinaka commented ·

Because I don’t know how to delete the old one and this one has updated diagram on it.

0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ chinaka commented ·

So you could have just edit the first question and exchange the picture.

0 Likes 0 ·
chinaka avatar image chinaka Matthias Lange - DE ♦ commented ·

It’s done now, I’ll do it for next time. What do you think of the new update?

0 Likes 0 ·

Related Resources

Victron BatteryProtect product page

VictronConnect VE.Bus charging manual  

Additional resources still need to be added for this topic