question

jsheehan avatar image
jsheehan asked

How to install Pylontech and Victron Offgrid System?

Hi,

I have recently purchased:

- 2 x 48v Pylontech 3.55kwh Batteries

- Victron Multiplus II 48/5000

- Victron SmartSolar MPPT 150/70

- Victron Cerbo GX

- 6 x LG Neon 2 360w Solar Panels


I am wondering what fuses, isolators, circuit breakers and any other products do I need to fully complete and install my system. Do I need a DC Fuse Disconnector straight after the Batteries? Do I need a Lynx Distributor, if yes, what does it do. It would be awesome if somebody could draw a diagram where each isolator, fuse or circuit breaker goes in my setup. Any help will be much appreciated.

Pylontechinstallationvictron
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Jack Peters avatar image
Jack Peters answered ·

The answers provided on this question would be a good place to start: https://community.victronenergy.com/questions/103954/what-isolators-fuses-circuit-breakers-or-other-pro.html

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.