mito avatar image
mito asked

Multiplus II self consumming showed in cerboGX

Without any grid or generator or solar and without any external load, it is to suppose that Inverter should be showing total master and slaves self consumming as AC loads, but in my case with paralel Multiplus II the AC power showed is only the Master. As show in Dashboard, Batteries show draining power for total self consumming, but in Inverter only shows what seems to be the Master self sonsumming.

Question: is it OK or there is some wrong setting ? In offgrid isolated installations, self consumming is a take care issue to protect batteries, so it is frequent I check self consumming to see if dirt in fans or other source of self consume increase.


Multiplus-IIcerbo gxVRM
1646825632546.png (43.9 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers