question

Prairiecamper avatar image

How to connect Victron connect and smart Battery Sense with smart solar mppt 100/30


I have a smart solar mppt 100/30 and the victron smart Battery Sense, I can get the smart solar to connect with victron connect but unable to get the sbs to connect with victron connect, it gets to 20% and stops. Reading through the manuals it says to enter the PUK code. I can’t find that on the sbs, however I don’t have the PUK entered for the smart solar mppt and it still connects to victron connect. What else do I need to do?

BluetoothSmart Battery Sense
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
DavidForet avatar image

Puk code of the Smart Battery Sense is on the label sticked on one of its side !

1 comment Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thanks I found the PUK codes, however I now have a question on two different temperature readings in a another post.