Idea

Ossi avatar image
Ossi Posted ·

BMV 7XX via VenusOS: SOC Reset & Relais Programming

Hi Victron Staff,


I found it multiple times annoying working with a BMV 700, that i must be onsite to reset the SOC calculations to 100%. Either via BT and Victron Connect or via Victron.direct to USB and Laptop


In my option it would be enough to add an "advance" tab in the BMV 7XX properties in the VenusOS, with in this Advance tab (similar to Multis) the Installer can reset the SOC to 100% and change the BMV Relais configuration (like the programming in VenusOS for the VenusGX Relais itself).

Add to BMV Menue:


New Submenues:

1)RESET SOC TO 100%

2)


BR

Oliver

Venus OSBMV Battery MonitorVE.Direct
1553015627636.png (4.2 KiB)
1553015700289.png (3.1 KiB)
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image
mvader (Victron Energy) Posted ·

Hey @Ossi. Thank you. Its coming; not exactly like this; but regardless: being able to remotely access all features of a BMV is coming.

10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image
mvader (Victron Energy) Posted ·

Hi; for those happy with Linux command line and protocol documentation; I wrote a few pointers on how to get this done yourself, without having to wait for our official feature.

https://www.victronenergy.com/live/open_source:ccgx:commandline#changing_settings_other_remote_commands

10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Your Opinion Counts

Share your great idea, or help out by voting for other people's ideas.