question

kylepaulin avatar image

Phoenix multiplus 12/3000/120 remote ON/OFF

I have a Phoenix Multiplus 12/3000/120. This specific model https://www.victronenergy.com/upload/documents/Manual%20-%20MultiPlus%203k%20230V%20Ve.Bus%20enabled%20-%20rev%2000%20-%20EN%20NL.pdf


is there any way to separately control the charger and inverter for a two signal BMS like on the new models?


thanks for any help.

Phoenix Invertercharger
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Barry Timm avatar image
Barry Timm answered ·

Yes. I do exactly this with my Electrodacus BMS managing the charging and inverter functions separately on my Multiplus 24/3000 since early 2020. You have to install and configure the 2-wire BMS Assistant software on the Multiplus.

2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.