question

ess-and-solar-solutions avatar image
ess-and-solar-solutions asked

Generator input not shown under AC1 on VRM summary widget

A customer of mine has a generator in a totally off-grid system to compliment his solar production. It is configured on the GX as Generator and not AC1 input and as a result he does not see on AC from the generator. I know there are other screen, but is this a possible enhancement in future release we can see?

1605004212373.png

VRMGeneratorac
1605004212373.png (8.6 KiB)
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

harold avatar image harold commented ·

If the only input is the generator, why not connecting it to AC1IN?

0 Likes 0 ·
ess-and-solar-solutions avatar image ess-and-solar-solutions harold commented ·

It is connected to AC1IN and since it is a MP II there is no AC2IN ;)

0 Likes 0 ·
1 Answer
jwfrary avatar image
jwfrary answered ·

Hi,

He wont seen anything coming in in that window because the inverter is inverting at the time the screen shot was taken!

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ess-and-solar-solutions avatar image ess-and-solar-solutions commented ·

Not to worry. Sorted I think ;)

1605107094439.png

0 Likes 0 ·
1605107094439.png (24.2 KiB)