question

DPA avatar image

VRM problem no energy consumption is shown

I have actual two MPPTs for two solar strings in my car (RV/Overlander)

And a smart shunt plus the Cerbo GX.

For some weeks everything worked very well, I could see all data at the VRM homepage.

If Saturday only the solar data are displayed, but not the energy consumption any more.

The actual consumption is still shown on the Dashboard side, but not in the graphs and statistics any more. What could be the reason? I have changed nothing in between.

On the remote console display I still can see all data. Solar and energy DC consumption.

I have restarted now the Cerbo GX two or three times, but nothing changed.

Thx for a hint

VRMdc dc convertersdashboard display
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
DPA avatar image
DPA answered ·

Danke für das Cerbo GX Update V2.58.

nun wird der Verbrauch wieder angezeigt.


1 comment Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

update to 2.60 cerbo gx and the consumption data are not shown at the portal