question

anton859 avatar image
anton859 asked

CerboGX does not display battery percentage using the Lynx ion BMS

The GX touch50 main screen does not display battery charge status information, the battery is connected to Lynx ion bms, bms is connected to CerboGX. I would be grateful for your help.

MultiPlus Quattro Inverter Chargercerbo gxBMSgx device
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
jerothle avatar image
jerothle answered ·

I don't have the Lynx Ion, but I didn't have the battery percentage on the Cerbo. I synchronized (or whatever one of the options are) on the Smartshunt and the percentage showed again.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

I'm not so similar with the Lynx system but i think it is the same as with the BMV, you have to make a full charge to see the SOC.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

anton859 avatar image anton859 commented ·

Thanks for the help, yes it really needs to be fully charged for the first time, then the percentage of charge will show.

0 Likes 0 ·