VRM Remote Update listing does not use custom names for MPPTs

Question

question

Warwick Bruce Chapman asked Jan 10, '20

VRM Remote Update listing does not use custom names for MPPTs

I have two banks of panels, one on the east of my roof and one on the west. Each bank is on a separate 150/35.

So, there is a East and a West MPPT: alt text

But when I go to Remote Update in VRM, the custom names are not displayed: alt text

VRM firmware update

mppts.png (100.0 KiB)

remote-update.png (49.1 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2020-01-10T23:46:21Z

Guy Stewart (Victron Community Manager) answered · Jan 10, 2020 at 11:46 PM

Good pick @warwick, I'll pass it on to the VRM developers. Cheers.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2020-06-03T09:42:14Z

dibe answered · Jun 03, 2020 at 09:42 AM

A sunny "moin" from Hamburg,

I have a similar problem. The names for the mppt are OK (and change from time to time) in the android app. There are the names Hinten and Einfahrt, But in VRM and in the remote console are the old names and I have no idear how to change them.
Hope you can help
Dietrich

1591177070650.png (80.7 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2022-08-08T16:13:49Z

looknow12 answered · Aug 08, 2022 at 04:13 PM

Same problem. Funny thing though, I have two controllers. My MPPT 150/70 VE.CAN did update Firmware 3.10. My MPPT 100/20 48V did not update. It is using a VE Direct cable and running 1.59 firmware. This was posted a while ago, Dev team, please acknowledge.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question