question

noah-guthrie avatar image
noah-guthrie asked

MPPT 100/15

I am looking to wire my 100/15 MPPT controller to my 85w hood mounted solar panel. Is it correct that I need to add a fuse on the positive connections into the controller and output to the battery? How big of a fuse?


Just to share more info on the setup, I am wiring two Dakota lithium 135ah dl+ batteries in parallel directly from the alternator and had to get a different charge controller that supports lithium.


Thanks in advance,


-Noah

MPPT SmartSolarLithium Batteryfuses
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
klim8skeptic avatar image
klim8skeptic answered ·

@Noah Guthrie The Manual shows the minimum requirements regarding fusing.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Fuses & fuse holders Product Page.


Additional resources still need to be added for this topic

MPPT product page

VictronConnect manual

PWM or MPPT

MPPT calculator

MPPT codes

Additional resources still need to be added for this topic

Battery Compatibility

Did You Know - How to create a battery profile for non-Victron batteries?