question

john245 avatar image
john245 asked

How to measure an accurate grid energy in case you have a SAP and PAP

The situation is that my installation has a Primary Allocation Point (PAP) and Secondary Allocation Point (SAP) as shown below:

victron-sap-pap-paty-iii-v01.png

Is it possible to add an EM24 energy meter to the SAP and an EM24 energy meter to the PAP. And will the system in that case totalize these values?

I think there are 3 scenario's

  1. PV I and PV II & III connected to PAP (no issue energy meter will give accurate values)
  2. PV I and PV II & III connected to SAP and the Victron system is charging the battery's. No security issue.
  3. PV I and PV II & III connected to SAP and the Victron system is supplying energy to the grid. Security issue with low probability of occurrence.


Multiplus-IIgridem24
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Additional resources still need to be added for this topic

Energy Meter Manual EM24 RS485

Additional resources still need to be added for this topic

MultiPlus-II Product page 

MultiPlus-II Manual

Multiplus-II GX Online Manual

MultiPlus-II 230V Datasheet 

VE.Bus Error codes