Getting Power from the grid only if Multiplus 2 has to deliver more than 2000 Watt

Question

question

karli asked Apr 28, '20

Hi,

I have an island with 1,92 KWp, MPPT 150/35, Multiplus 2 48/3000, Venus GX and 3 Pylontech US2000.

In some cases, when the MP2 has to generate more then 2,5 KW, the MP2 is blinking red, which means overload.

Now i want to configure my system so, that it gets power from the grid only if MP2 has to generate more than 2 KW. But how ?

Thanks for your answers

Karli

Multiplus-II grid

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2020-04-28T11:51:44Z

ejrossouw answered · Apr 28, 2020 at 11:51 AM

Hi @Karli. This can be achieved using ESS. There are various ways to do it so have a good read of the below document.

Hope it helps

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.