question

jonofe avatar image
jonofe asked

Gridmeter missing in VRM and Grid headline missing in local WebUI

Hi guys,

I have setup my Cerbo GX on a Raspberry PI with the latest VenusOS (v3.10~8). In the local UI I see the grid meter data in a red box, but without the headline "Grid". Grid meter data is provided by MQTT from a WAGO grid meter which is read by Modbus.

If I login into VRM online portal I don't see the grid meter at all.

What do I have to do to solve these issues?

Here are the screenshots...

Missing grid meter in VRM:

tripowerx-gx-1.png

Missing "Grid" headline in local UI:

grid-meter-local.png


VRMVenus OSEnergy Meter
tripowerx-gx-1.png (23.3 KiB)
grid-meter-local.png (32.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Remote console -> settings -> system setup -> AC input 1

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jonofe avatar image
jonofe answered ·

That is already set to "Grid".

Could it be the reason, that AC-In is not yet connected?


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.