I ahve a BYD battery system with low batteryb charge, there is an grid AC 2 input but the Victron Quattro units wont let it charge the batteries
Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.
Ac 2 IN Grid input this may take 5 to 20 min to start charging
if you put the grid on AC1 IN then charging would start straightway (well close to)
Victron BYD battery compatibility guide
CCGX Product Manual
CCGX Product page
11 People are following this question.
BMS Coupling 2 BYD L Boxes for Color Control
MPPT 250/60 and 150/60 parallel to BYD B-Box Pro 13.8
Quattro based SOC % counts down too slowly but CCGX displays correct AC load wattage
Communications Connection Type BYD - CCGX - MPPT
BYD B-Box Pro 7.5 unable to start.