question

charlie22824 avatar image
charlie22824 asked

State of charge differences

671CEED2-9250-4291-9E24-8ED49FB5B466.jpeg Hey, I’m curious on this. I don’t want it to mess my batteries up. My SmartShunt says my batteries are 100% full. But my VS. Bud Smart dongle connected to inverter says they are only 81% charged. Does anyone know how to fix this?



chargerSmartShuntSOCVE.Bus Smart Dongle
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
klim8skeptic avatar image
klim8skeptic answered ·

Does anyone know how to fix this?

The VE Bus battery monitor in the multi is not very accurate when the battery is also charged with a mppt. In the multi's "general" settings tab, untick "enable battery monitor".

Put your effort into setting up the SmartShunt properly.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Chargers.

Additional resources still need to be added for this topic

SmartShunt Product Page

SmartShunt Installation Manual

SmartShunt Quick Installation Guide

SmartShunt Datasheet