orbitwrigleys avatar image
orbitwrigleys asked

Charger and battery sensor show different chaging time data

Hi, Guys!

I have a Victron Smart IP65 charger 230v 12v/7a, 45Ah AGM battery, and Smart Battery Sense. Today, after another power failure and the battery working for 4 hours, I put it to charge. After 3 hours I saw that the charger reports that charging time is 2 hours but the data in Smart Battery Sense was different. You could see on the screenshots below that Battery Sense reports that the voltage was up at 13:10 and still high to ~16:10.

Any ideas where 1 hour is lost? Thanks for the advice!


battery chargingSmart Battery Sense
charger.jpg (66.8 KiB)
sense.jpg (59.5 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

VictronConnect VE.Bus charging manual  

Additional resources still need to be added for this topic

Smart Battery Sense Product Page

Smart Battery Sense Manual