question

dk-butta avatar image
dk-butta asked

Smart Battery Sense Not Working

Smart Battery Sense started showing -460 F temperature and when I try to connect to it, it will get to 80% connection and keep restarting. The light just flashes blue. My network shows that my Smart Solar MPPT is using it for temperature and voltage readings, but it's all messed up. Was working fine until a week ago. No changes have been made and my system has been working fine for almost a year. Can't figure out how to fix it.

VictronConnect_report.logimg-0217.jpg

Temperature SensorSmart Battery Sense
img-0217.jpg (59.8 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
kevgermany avatar image
kevgermany answered ·

Sounds like a dealer/warranty job.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thiemo van Engelen (Victron Energy staff) avatar image
Thiemo van Engelen (Victron Energy staff) answered ·

Hi,

Have you tried power cycling the Smart Battery Sense by disconnecting it from the battery for a few minutes? One way to disconnect it is by unscrewing the fuse holder.

Kind regards,

Thiemo van Engelen

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Smart Battery Sense Product Page

Smart Battery Sense Manual


Victron temperature sensor disambiguation table - which product supports which sensor