I have a 1300ah 48v setup of AGM batteries and as it gets cold in the UK should I change the temp coefficient setting in the smart shunt from 0 to something else, can anyone advise please?
Thanks Dave.
I have a 1300ah 48v setup of AGM batteries and as it gets cold in the UK should I change the temp coefficient setting in the smart shunt from 0 to something else, can anyone advise please?
Thanks Dave.
Hi @nesswill
This is only applicable if you have the accessory temp sensor, AND you're not using either of the Aux port Voltage functions. If that applies, then this from the manual..
You could try it. But many of us would probably find more usefulness in one of the Voltage functions.
Smart shunt doesn't have a temperature setting.
Chargers like the multiplus do.
35 People are following this question.