question

boondoggler avatar image
boondoggler asked

Victron Lynx Shunt not found on Cerbo GX

I have installed a lynx Shunt to the right of my power in and before my distributor. I have a cerbo GX and have the ethernet cable from victron and the termination plugs installed. I can't get the shunt to show up in my cerbo GX screen. It can see both of the MPPT's. Any idea what I am doing wrong?

cerbo gxlynx shunt
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
johanndo avatar image
johanndo answered ·

It goes into one of the CAN ports, I think, not in the Ve.Bus or LAN. Check if you use the proper input.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kwunhung avatar image
kwunhung answered ·

I had the same problem, and suddenly one day I couldn't find it, but the bus didn't change and the RS450-200 MPPT was connected, and the MPPT worked fine.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.