sv-the-dream avatar image
sv-the-dream asked

Smart BMS CL 12-100 only giving 4-6A

Just plugged my new Smart BMS CL 12-100 with a 80A fuse however the device is only giving an output to the LiFePo4 battery bank of 4-6A maximum when running the engine. The state of charge of the battery is 80% and it is at 13.3v -120Ah (it’s a 600Ah battery bank).

When I plug the solar (MPPT) it is giving way more than that amount of Amps so clearly the system wants to take charge.

Any advise?

Entire system is Victron except solar panels

BMSsmart lithium
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers