question

David avatar image
David asked

After blackout I cannot connect to cerbo UI on local lan IP

I had a (grid) blackout this morning, and as a result, my internet router had issues. After rebuilding my local network I have issues connecting to the local LAN IP of my Cerbo.

I can access the Cerbo via VRM- including the Remote Console. However, if I try to access the Cerbo UI via its Local LAN IP - 192.168.100.107 (assigned by DHCP) - I get refused to connect error.

Tried the local link IP as well - no go.

I know it's connected to the internet and working, as it's accessible via VRM.. But I'm puzzled as to why I can't get to it locally?

I can ping it - No probs.

Any ideas as to why the WebUI may not be working? (im running the 2.80~5 I think)

cerbo gxTCP IP Networking
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
JohnC avatar image
JohnC answered ·

Hi @David

Try a reboot of the Cerbo. Or a firmware update to 2.81

Instead of the IP numbers, try typing "venus.local".

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.