Curious why in an alarm rule the “time since last full charge” displays as a decimal and not hh:mm format?
Also, does anybody have recommend values for this alarm rule? (Low, clear low alarm above, high & clear high alarm below)
My build…All Victron. 2x200ah Smart Lithium, Smart BMS CL 12/100, Cerbo GX, GX Touch 50, Multiplus 12/3000, SmartShunt500A, SmartSolar charger MPPT 100/50, Load and charge smart battery protects.
Settings…absorption at 14.2V for 1.5 hours with float at 13.5V.
Best Regards…Jonathan
