Idea

harold avatar image
harold suggested

VRM overview of AC2OUT relay status

Hi,

Could the status of the relays, Quatro, be made visual on the VRM portal, especcially de AC2OUT relay will be very usefull.


And may be additional, add a possibility to switch the AC2OUT relay manually on the CCGX


Harold

MultiPlus Quattro Inverter Chargerac out 2
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Trevor Bird avatar image Trevor Bird commented ·

In a similar way to do with AC2 it would be wonderful to reduce the time from generator start to AC2 available to less than two minutes. This sounds trivial but the implications are large. More than one prestige yacht manufacturer bypasses the Quattro because the delay is too long. The client thinks a fault is in the system. Start generator and two minutes still no power? It would be good to reduce this if the installer wishes. In some cases the delay is far too long. It is a real shame because it ruins a really good system for no apparent reason.

2 Likes 2 ·

5 Comments

harold avatar image
harold commented

Still wish

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Warwick Bruce Chapman avatar image
Warwick Bruce Chapman commented

Nice idea. Could be done pretty compactly.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

harold avatar image
harold commented

Kick-up, for a new version?

;-)

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ls-design avatar image
ls-design commented

would be handy

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rmoosa avatar image
rmoosa commented

We have achieved this functionality using a combination of one of the built in relays on the cerbo and an assistant. We also control this via node-red.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mito avatar image mito commented ·
Hi MOOSE

Can you get in some more detail what you have implemented with cerbo relays, assistant and nodered?

0 Likes 0 ·

Your Opinion Counts

Share your great idea, or help out by voting for other people's ideas.

Related Ideas

Quattro AC out 2 fixed delay in some cases is too long - Better to be user selectable.

Make a Quattro compatible to Multiplus same system 12/3000 or so

1 wire Remote control of multiplus inverter using BMV relay output but no additional relay.

Charge Current Limiter including Alternator

multiplus ignition management

Generator Cool Down incorporated in Auto Gen Start software

Transfer Switch Mode for Quattros to solve overloading issues during transfers

For future modifications .Aux contacts ..from Ex: Multiplus ....is more attractive if it can be PWM control signal.

Quattro AC connections suggested manual update

Ignore AC1(/2) function in ESS