question

rui-ferreira avatar image
rui-ferreira asked

How to get individual data for Master and for Slave in a parallel operation?

There is a similar question "How to get individual dc, ac and power data using VRM or GX?" placed by "mito" two years ago, on the Feb10 2022, which unique answer didn´t solve the question.

May be, two years past, there is now a better answer.

For the record: my installation is running two Phoenix Inverters 48/5000 in parallel operation, off-grid, connected to a Cerbo GX.

Actual VRM information, using Control Pannel/Advanced/Widgets only shows Cluster Totals, but I'm looking for data (DC, AC, Power) separated, for the Master and for the Slave.

So, I repeat my question: Is there a way to retrieve this information from VRM Portal or from my GX?

Thanks in advance.

Phoenix Invertermultiplus in parallel
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

I just typed a basic search into the bar and easily found a post I made about this topic.

Obviously, clamp meters on site are the simplest.

https://community.victronenergy.com/questions/273710/nodered-show-parallel-system-stats.html

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.