Freedom won battery 12/15 kw charging

Question

question

potgieter asked Oct 14, '22

Freedom won battery 12/15 kw charging

The freedom won 12/15kw battery charge to approx between 77-88% and then jumps to 100% within a minute, it became worse when ve.bus state started showing externel control and not bulk/float anymore. Approximately 14/15 September

any help hereC09D9E38-7FB1-48AF-867C-086E60E8C8B6.png

battery charging Lithium Battery freedom won

c09d9e38-7fb1-48af-867c-086e60e8c8b6.png (243.9 KiB)

1b5b004c-cbf3-4286-bf3f-f496bcd8e655.png (243.9 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2022-10-14T16:41:35Z

nickdb answered · Oct 14, 2022 at 04:41 PM

Its a known issue with the FW. Widespread problem that I am also experiencing. They are testing new firmware, but there are more questions than answers at the moment.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2022-10-15T09:58:55Z

Jonathan answered · Oct 15, 2022 at 09:58 AM

Hi Potgieter,

I have created a post asking for feedback from the community who are experiencing similar problems with the Freedom Won batteries.

Please could you Like so we can track how widespread this is, and how many installers these problems are affecting.

https://community.victronenergy.com/questions/162673/attention-freedom-won-installers-feedback-needed.html

Thank you - Jonathan

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question