VE.Direct - Text Mode data blocks

Question

question

dcw asked Jul 28, '21

In VE.Direct:

Do the data blocks sent in text mode always start with a "PID" field ?

In other words, can the "PID" label be used as data block header ?

Thanks

VE.Direct protocol

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-07-28T17:45:54Z

Mike Dorsett answered · Jul 28, 2021 at 05:45 PM

As far as I've seen wiht the MPPT devices, this is always the case, and the block ends with the checksum.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.