question

Zakhar avatar image

Seems bug was introduced in Venus OS v2.23

@Guy Stewart (Victron Energy Staff)


It seems a bug was introduced in last firmware Venus OS v2.23.

The system is allowed to feed-in excess solarcharger power.

From 20/02 the system started to push energy to the grid till night.

Previously it worked without night feed-in. Also please see another one attached figure.

Venus OSbug report
20-02-19.jpg (46.2 KiB)
18-02-19.jpg (49.7 KiB)
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi @Zakhar thank you reporting. We’ll investigate and in case of any questions our supportdesk will contact you.

2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tommas avatar image
tommas answered ·

Hello, im new to the community here so sorry if my post doesnt belong here.

@mvader (Victron Energy Staff) @Zakhar

Ive experienced the same, so was searching the forum if someone had the same issue. Sometimes the multiplus is spontaneously pulling max power from battery to grid, in that case my 60A bms cant handle the current so cuts off the power. But last night it discharged my batteries starting around 500W and in the morning it was still delivering around 50W back in to the grid.


2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.