question

ivan-sk avatar image

I have smart solar charger and want to log on victron connect

there is written no need to pairing but when i open victron connect i see the solar charger and when i click on it ask me for pairing and not taking 0000 nor 1234 and after that not possible to load

VictronConnect
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
wkirby avatar image
wkirby answered ·

I'll start you off, the pin is 000000. The meaning is that you need to pair from within VictronConnect, not from the phone Bluetooth manager.
Here is the VictronConnect manual, please read it for more information.
https://www.victronenergy.com/media/pg/VictronConnect_Manual/en/connecting.html

2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

seb71 avatar image
seb71 answered ·

The default PIN is 000000 (six zeroes).


If pairing does not work, remove it and try again.

2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.