question

Zakhar avatar image

BYD SoC doesn't reach 100% - problem in temperature compensation?

I've noticed that one of my installations doesn't reach 100% SoC with sheduled charge.

Is it possible, that due to the low temperature MultiPlus compensates charge voltage but does not change the SOC correlated with the voltage?


MultiPlus Quattro Inverter ChargerSOCBYD
byd-victron.jpg (118.9 KiB)
low-temperature.jpg (41.4 KiB)
config.jpg (67.1 KiB)
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
BYD_service avatar image

Hello Zakhar,

I don´t think this is related to the temperature. It not only doesn´t reach 100% but also doesn´t reach 55.2v. Could you try increase this voltage to see if you can reach the calibration point?

1 comment Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thank you for quick response. I'll do it and tell you about the result.