petekriv avatar image

BMS12/200 with alternator control cable?

I'm just fitting a VE Bus BMS to a BMS12/200 using the alternator control cable. I am wondering where the outgoing load cables go on the BMS12/200, as the schematic for the the Alternator control cables states that LB on the BMS12/200 will not be operational.

2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers