question

solarsean avatar image
solarsean asked

Programming Multiplus Assistant Through VictronConnect

I'm familiar with programming the Multiplus using VEConfigure and loading assistants through that program. Now that I'm using VictronConnect to program the Multiplus, how do I load the VE.Bus BMS Support Assistant?

MultiPlus Quattro Inverter ChargerVictronConnect
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
jeroend avatar image
jeroend answered ·

You will need a MK3 cable and make such settings via VEConfigure as per the manual:

https://docs.victronenergy.com/victronconnect-vebus.html#victronconnect-vs-veconfigure-veflash

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.