question

Justin avatar image

Battery SOC not reseting - Smart Shunt

Hi all,

I've just upgraded the clients remote solar sites to a larger SCC and new batteries and a smart shunt to monitor DC loads off the battery.. i have setup the VE.network via bluetooth between the SCC and the Smart Shunt and the Smart battery sense monitor and everything is working great expect for with when the batteries are changed to 100% the SOC on the smart shunt doesn't reset.. is there a setting i have missed ?

Below are the settings on the shunt

i've been reading a little on the DVCC on the Colour GX and about sharing information - is this what i need enabled ?


thanks

Justin

BMV Battery MonitorCCGX Color ControlSOC
1597627159406.png (41.2 KiB)
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Peter Buijs - NL avatar image
Peter Buijs - NL answered ·

Maybe evaluating the setting Battery starts synchronized will give you an idea what is happening...

https://www.victronenergy.com/upload/documents/Manual-SmartShunt-EN.pdf



1 comment
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Hi Peter, so do you recommend me turning this setting off ?