question

lklmenterprises avatar image
lklmenterprises asked

What is the Difference between Shore and Grid in AC Input 1

This setup is an EasySolar 12/1600 - and in setting up everything I have Grid set to NO - as I have no intentions to feed the grid (for which this unit is not AS4777 compliant anyway in Australia)

However I notice in the Venus when I go to System Setup in the Venus there is reference to monitoring for Shore disconnect:

and also in AC Input 1 the ability to choose different AC Sources.

I can choose between Grid, Generator and Shore. So if I choose Grid here - does that effectively change what I have already set for No Grid via VE.Config? or is it for something in how it manages the power profile (for calculations...)

OR is it for the Ground Relay? where there is reference in this at Section 4.3 of the Manual...

MultiPlus Quattro Inverter ChargerEasySolar All-in-One
1593780301653.png (26.3 KiB)
1593780580883.png (35.9 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers