Just installed the CTEK Offroad system on my 4X4 vehicle.
Connected the Victron BMV-712 to monitor only the AUX battery, a 77AMP Trojan MOTIVE 24-GEL.
What parameters should I use with the VictronConnect BMV app.
What value to set at the "Charged Voltage"?Trojan MOTIVE 24-GEL
Battery spec. shows Float Voltage (2.25 V/cell) 13.50 while "STATE OF CHARGE MEASURE OF OPEN-CIRCUIT VOLTAGE " is 12.84 for.
Should I configure the VictronConnect BMV app Charged Voltage to 13.5 or 12.84?
What should be set as "Floor" value? Trojan PDF claims for 11.84 as 0% battery?
Can anyone direct with other parameters to be set based on attached Trojan spec sheet?
