question

Paul B avatar image

Re the ET340 Grid meter and a GX Color control and VRM data displayed

Is there a way to get Frequency and Power factor to display on the GX or on the VRM graphs

Also the Gateway VRM does not seem to log the Voltage and amps in its graphs for the Energy meter, is there a way to turn this option on


Energy Meter
1582952381620.png (31.5 KiB)
1582952601201.png (11.6 KiB)
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·
3 comments
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Hi Daniel, Your answer at this post does not assist with the questions about power factor, frequency, voltage, current. The only information available is Power.


It would be extremely useful to us to be able to see all of the above information on a new energy meter device on the advanced reporting page.


We have a set of EM24 based energy meters using external CTs which we use at prospective clients to meter their systems. However, not being able to see all the information available from the EM 24 is less helpful than it could be.


CC @mvader (Victron Energy)