question

djibi avatar image
djibi asked

Phoenix inverter

Does anyone have used the BMV relay to remote control the phenix inverter , in order to prevend battery discharging under 50%?


thanks



Phoenix Inverter
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

augustine-beyuo avatar image augustine-beyuo commented ·

please I have a phoenix inverter which I installed and it works for about 30 minutes and later gave overload. for now no load on it but still indicate overload, what could the possible cause ?

0 Likes 0 ·
1 Answer
wkirby avatar image
wkirby answered ·

This should be possible. Inside the Inverter on the PCB should be terminals called "Remote Switch", you can connect the relay contacts from the BMV here to switch the Inverter on or off.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

djibi avatar image djibi commented ·

thanks a lot

0 Likes 0 ·