question

mystic avatar image
mystic asked

Cerbo does not see my shunt

Cerbo is connected to shunt with a Victron cable. Disconnected LiFePo batteries in the fall for boat storage. When I reconnected batteries all I see on my touch screen is voltage. No state of charge or any other details. Everything shows on the mobile app. Cerbo was updated with latest software yesterday.

cerbo gxSmartShunt
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@Mystic


Of it is voltage only and -- then that is normal until it synchronises after a ful charge. See here.


Hopefully you have updated everything. The update had nothing to do with it, just the loss of power.


In future you can use the setting, keep last soc on loss of power/reset

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.