Bug CerboGX 3.10 large: SignalK not responding

Question

question

a9b8c7 asked Sep 13, '23

After updating a CerboGX from 3.01 to 3.10 I realized SignalK/port 3000 is not responding. A port scanner doesn't find a open port 3000.

Installed 3.01 large again: SignalK is working.

Venus OS bug report SignalK

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guy Stewart (Victron Community Manager) ♦♦ commented · Sep 14, 2023 at 12:12 AM

Thanks for reporting @A9b8c7,

I’ve passed it on to the developers.

0 ·

Answer 1 · 2023-09-14T05:14:12Z

mvader (Victron Energy) answered · Sep 14, 2023 at 05:14 AM

Hi!

I’m 99% certain that your data partition is full.

Did signalk server start again after downgrading to v3.01?

For further troubleshooting see here:

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) ♦♦ commented · Sep 14, 2023 at 05:16 AM

Sorry, I see I overlooked your comment that it works on again after installing v3.01.

Is it ok if I login to your system to capture the logs? Is it searose?

0 ·

a9b8c7 mvader (Victron Energy) ♦♦ commented · Sep 24, 2023 at 09:14 PM

Yes, you're welcome. Let's go ahead by email.

0 ·

Answer 2 · 2023-09-24T21:51:20Z

Sarah answered · Sep 24, 2023 at 09:51 PM

I have upgraded to v3.10 on. cerboGX and it’s is good with SignalK.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.