@mvader (Victron Energy) Please help me understand we still can't control Orion DC-DC chargers with CerboGX. Two Victron devices that have been out for years.
Especially when they will connect and pair with each other. Screen shots below are SSH'd into the Cerbo. Steps taken: Scan On > Trust Device > Connect Dev > Pair Device
I'm running 3x of the 12v-12v 30A in parallel (front/middle/rear), and i constantly have to cycle charging to get them back into bulk. They are feeding a 12v/800ah/10kw battery bank.
They are my main power generation in my Van. I've even seen them each in a different state at the same time (bulk/absorb/float) They all have the exact same config. 
