Showing EV Charger on GX Touch

Question

question

frederic asked May 28, '23

Hello there

For a client I have installed a complete Victron installation.

Next to the 3xMultiPlus-II and the Cerbo there is an EV charger and a GX Touch installed.

Now when we installed the GX Touch, on the overview page, there is no EV charger showing up.

Is there a way to show or program this? Or is anybody busy with it?

I think this would be a nice feature, specially because this is a new market.

Thanks in advance

cerbo gx ev charging station touchscreen

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2023-05-28T13:55:40Z

Lucian Popescu (Victron Energy Staff) answered · May 28, 2023 at 01:55 PM

Hi, not on the GUI that we are using now. A new GUI is under development, but I can't tell you when it will be released.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2023-07-26T11:46:44Z

pauldunn answered · Jul 26, 2023 at 11:46 AM

I have had EV Charger NS installed and immediately noticed this issue.

@Lucian Popescu (Victron Energy Staff) will this new GUI display the charger? Will the new GUI support GX Touch 50?

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) ♦♦ commented · Jul 26, 2023 at 12:09 PM

yes

1 ·