question

Ken Deemer avatar image
Ken Deemer asked

VRM Not monitoring Battery when Multiplus II is Off

I have a Multiplus II charging an AGM battery bank, a Smart Shunt, and a Cerbo Gx. The Smart Shunt is configured as the battery monitor. I often turn off the Multiplus at night. When off, both the Smart Shunt and the Cerbo show the battery voltage, current, SOC, etc. But the VRM consumption graph shows zero consumption during this time. What could be causing this?

img-9673.png

VRMBMV Battery Monitor
img-9673.png (510.2 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

Have you set the shunt as the monitor in the gx system setup?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.